The Bridge - A Visual Break

 

New Conveyor

 

The video below shows it working

09 Hunslet

The Kato 11-109 chassis is widely used by 09 modellers in small diesel locos. However, when used on tight radius curves the loco can derail. This is caused by a long overhang, so the coupling tends to pull the loco off. Kato also make a bogie chassis (11-105) this is slightly longer but still fit into a model, in this case a Hunslet form A1 models. The supplied couplings were removed and a 3D printed version was added. These are attached to the bogie and therefore turn as the loco traverses a tight curve, which should prevent any derailing. The low sole bars cover the bogies from sight. 

Wren - Locos n Stuff kit

 

Calshot Coach

 

Another Hudswell loco

 

The Office

The footbridge will be stone construction and will provide a scenic break. The building on the right will be a Nissen hut, brick front and corrugated steel roof/walls.

 

Conveyor Finished